Tapo H110 I Smart IR & IoT Hub

• All-in-One IR Remote: Replaces multiple infrared remotes. It supports 18+ device types (ACs, TVs, Fans, Projectors, etc.) and over 8,000 brands.
• Matter-Certified: Integrates your IR appliances and Tapo sensors into the Matter ecosystem, allowing you to control them via Apple Home, Google Home, Amazon Alexa, or Samsung SmartThings.
• Built-in 93dB Siren: Can be used as a security alarm or a doorbell chime when paired with Tapo sensors or buttons.
• Smart Automation: * Location Control (Geofencing): Automatically turns on the AC when you are nearing home.

• • Sensor Triggers: Turn on a fan if a Tapo temperature sensor gets too high.

• Offline Control: Can still execute local smart actions even if your external internet connection goes down (as long as the local network is active).
• IR Learning: If your specific device isn't in the database, the hub can "learn" the buttons from your existing remote.

• Line of Sight is Key: Since IR signals cannot pass through walls or solid objects, the hub must have a clear "view" of the devices you want to control.
• Optimal Placement: Avoid placing the hub behind your TV or near large metal objects, as these can weaken the signal or block the IR beam.
• Bluetooth for Setup: You only need Bluetooth enabled on your phone for the initial pairing; afterwards, the hub communicates over 2.4GHz Wi-Fi.
• Power Requirements: The hub uses a USB-C port for power. It requires a 5V/2A power adapter, which is often not included in the box.

• RF vs. IR: This hub only controls Infrared (IR) devices. It cannot control Radio Frequency (RF) devices (common with some ceiling fans or garage doors).
• Network Compatibility: It only supports 2.4GHz Wi-Fi bands. It will not connect to a 5GHz-only Wi-Fi network.
• Indoor Use Only: The device is not waterproof. Keep it away from high-humidity areas or direct sunlight, which can interfere with the IR sensors.
• Safety Clearance: Maintain at least 20 cm (8 inches) of distance from the device during operation to comply with RF exposure guidelines.

• Tapo H110 Hub (the main unit)

• USB-A to USB-C Power Cable

• 3M Adhesive Tape (for mounting to a wall or underside of a shelf)

• Quick Start Guide

Note: Most regional versions do not include the 5V/2A USB power brick/adapter. You can use a standard phone charger or a USB port on a power strip.